Home / Installation Guides / Signpost Surface Mounting Guide
How to install our surface mounted Triplex powder coated mild steel signposts:
- Position the Sign PostDetermine where you want to place your sign post. Position the sign post in the desired location on the surface (concrete or asphalt)
- Mark Drilling PointsUsing a marker, outline the holes on the base plate onto the surface. This will guide you where to drill.
- Pre-Drill HolesUsing a hammer drill with a masonry bit, drill holes into the surface where you marked. The depth of the holes should match the length of your concrete anchor bolts.
- Insert Anchor BoltsAfter the holes have been drilled, clean out any dust or debris. Then, insert the concrete anchor bolts into the holes.
- Attach the SignPost Position the base plate (which is attached to the sign post) over the anchor bolts. The bolts should align with the holes in the base plate.
- Secure the Sign PostTighten the nuts onto the anchor bolts, thereby securing the sign post to the surface. Use a spanner or socket set to make sure the nuts are securely tightened.
- Check the PostUsing a level tool, check to ensure the sign post is straight. If necessary, make adjustments by loosening and retightening the nuts.
- Final CheckAfter making sure the post is level, give all the nuts a final tightening to ensure the sign post is secure.
Notes
Remember to always observe safety precautions while handling these tools, especially the hammer drill and bolts.
Contacts
Should you have any questions relating to the installation of the above, please feel free to contact any of our specialist team
PHONE
Materials Needed:
Surface mounted Triplex powder coated mild steel signpost
Concrete anchor bolts
Hammer drill with a masonry bit for drilling into concrete or asphalt
Spanner or socket set for tightening bolts
Level tool
Gloves